Fuse High (Default 0xdf Arduino 0xdd Internal clock Arduino 0xdd) 7 RSTDISBL External Reset Disable 6 DWEN Debug Wire Enable 5 SPIEN Enable SPI programming 4 WDTON Watchdog Timer Always ON 3 EESAVE Save EEPROM through chip erase 2 BODLEVEL2 Brown Out Detector Trigger 1 BODLEVEL1 BOD detector trigger 0 BODLEVEL0 … Fuse Low (Default [...]

Posted in Hardware Notes, ITP Fall 2007, Intro to Physical Computing 2 Comments »

I’d never done a full piece out of cut samples & figured this was a good time to pull out the sampled I’d recorded for our earlier assignment and play with Audacity. This is the result: all vehicles have to go.aiff

Posted in Comm Lab, ITP Fall 2007 No Comments »

For our final we went through a slew of designs, starting with the blocks idea from HeeJin, Matt and Jose’s midterm & moving in a direction utilizing RFID, then that idea became a large circular center piece with a built-in display for visuals surrounded by 8 pods that would detect pieces via RFID & control [...]

Posted in ITP Fall 2007, Intro to Physical Computing No Comments »

A first work doing animation in Flash, in collaboration with Chris Cerrito.  Flash was a pain in the ass to work with from a beginner’s perspective, but this assignment ended up being a lot of fun.  I have to give mad props to Chris; we were fighting with the interface together & he came up [...]

Posted in Comm Lab, ITP Fall 2007 No Comments »

Alex started the project (including fiddles) and then handed it off to me; I added some guitars and bass (and of course it needed cowbell) and tweaked it a bit.  Lots of fun with GarageBand’s Nordic Fiddle loops…Here’s an m4a…

Posted in Comm Lab, ITP Fall 2007 No Comments »